<<Prev Next>> Scroll to Bottom
Stuff goes here
L1[00:02:53] ⇨
Joins: AshIndigo
(uid202308@id-202308.charlton.irccloud.com)
L2[00:04:16] <Kodos> Hm, what would be the
cleanest approach for using two server racks, linked to each other
via telling the top to use bottom, and bottom to use top, and then
having a single server dedicated to networking traffic in/out of
the dual-rack via the back of the upper rack
L3[00:04:50] ⇨
Joins: Vexatos
(~Vexatos@p5B3C9D9D.dip0.t-ipconnect.de)
L4[00:04:50] zsh
sets mode: +v on Vexatos
L5[00:06:31] ⇦
Quits: Doty1154 (~Doty1154@2601:648:8000:134f:ade7:dfb9:9f2:b00f)
(Read error: Connection reset by peer)
L6[00:12:32] <Kodos> Ugh, nevermind, now I
remembered why I didn't do this before
L7[00:12:42] <Kodos> Can't have more than
one MAYBE two servers in a single dual rack
L8[00:12:57] <Kodos> Since I would need
either an extra block behind it for a relay, or a rack-mounted
relay
L9[00:17:22] <Kodos> Got about halfway
through writing up a rack mounted relay request issue, but what's
the fecking point.
L10[00:27:57]
<Dudblockman> Or... use the server's
internal relay?
L11[00:28:16]
<Dudblockman> *server rack
L13[00:33:18] ⇦
Quits: Vexatos (~Vexatos@p5B3C9D9D.dip0.t-ipconnect.de) (Quit: I
guess I have to go now. Bye ✔)
L14[00:43:08]
<soonTM>
ฏ๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎ํํํํํํํํํํํํํํํํํํํํํํํฏ๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎
L15[00:43:08]
<soonTM>
๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎ํํํํํํํํํํํํํํํํํํํํํํํฏ๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎
L16[00:43:08]
<soonTM>
๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎ํํํํํํํํํํํํํํํํํํํํํํํฏ๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎
L17[00:43:08]
<soonTM>
๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎ํํํํํํํํํํํํํํํํํํํํํํํฏ๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎
L18[00:43:09]
<soonTM>
๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎ํํํํํํํํํํํํํํํํํํํํํํํฏ๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎
L19[00:43:13]
<soonTM>
muehahaha
L20[00:59:04]
<Kodos>
Internal relay can't be upgraded (Without editing the config)
L21[01:01:28] <DeeJayh_> What about the
external relay?
L22[01:04:37]
<Kodos>
Ehhh, it's an additional block I'd have to have, but it's
usable
L23[01:16:01] ⇦
Quits: Cervator (~Thunderbi@2601:4c1:4000:1050:b46b:31c9:2ce4:92c9)
(Quit: Cervator)
L24[01:51:13]
<soonTM> use
ext relay if you are itching for higher rates
L25[01:51:20]
<soonTM> or
wireless network card
L26[01:58:46]
<soonTM>
@Kodos make a server based relay with a 0 strength wireless network
card that the others send to
L27[01:59:54]
<soonTM>
write a looping script into the eeprom that recieves the message
and sends it to the recipeints
L28[02:01:59]
<LizzyTheKitty> The wireless cards both
have to be within the others signal range to pick messages up
L29[02:02:09]
<LizzyTheKitty> Iirc
L30[02:02:38]
<soonTM>
dammit man
L31[02:02:51]
<soonTM>
should be like space engineer's antenna system
L32[02:03:02]
<soonTM>
should be like space engineers' antenna system
L33[02:11:39] ⇦
Quits: Icedream (~icedream@has.streaminginter.net) (Quit: A lol
made me boom.)
L34[02:12:41] ⇨
Joins: Icedream (~icedream@has.streaminginter.net)
L35[02:19:39] ⇦
Quits: Sava (~Sava@cable-178-148-185-58.dynamic.sbb.rs) (Ping
timeout: 200 seconds)
L36[02:24:01]
<Saphire>
*SCREAMING*
L37[02:24:06] <Corded> * <Saphire>
shakes gpg-agent
L38[02:24:13]
<Saphire>
YOU FUCKING LITTLE SHIT
L39[02:24:41] <Lizzy> lol
L40[02:25:50] ⇨
Joins: Sava
(~Sava@cable-178-148-185-58.dynamic.sbb.rs)
L41[02:26:46]
<Saphire> I
HATE THIS LITTLE FUCKER
L42[02:30:18] <Corded> * <Saphire>
more screaming
L43[02:30:45]
<Kodos>
Speaking of cool space games, who all owns Pulsar Lost Colony
L44[02:32:29]
<Saphire> I
seen it, it is awesome... and I don't have it
L45[02:32:53]
<Saphire>
Okay, so.. gpg-agent. I am using this little fucker as my ssh-agent
replacement...
L46[02:33:00]
<Saphire>
And after update, guess what?
L47[02:33:06]
<Saphire> It
decided to stop working!
L48[02:33:25]
<Saphire>
Now it just says "a gpg-agent is already running - not
starting a new one"
L49[02:33:31]
<Saphire>
***AND THAT'S IT***
L50[02:33:42]
<Saphire>
pgrep gpg-agent before starting it? *nothing at all*
L51[02:41:56]
<soonTM> I
have a spare server lying around my house, and i have a need for
map-wide communications on my modded server, which has
opencomputers
L52[02:42:01]
<soonTM>
cleveridea.jpg
L53[02:45:24] <Forecaster> uuh
L54[02:45:28] <Forecaster> what have you
been doing
L56[02:48:18] <Kodos> @soonTM, why not use
OpenRadio and use lasers for long range communications, and just
have relay stations
L57[02:56:08]
<Saphire>
***OH YOU LITTLE FUCKING SHIT. I WILL FUCKING KILL THAT LENART
GUY.***
L58[02:56:12]
<Saphire>
*groans*
L59[02:56:35]
<Saphire>
Okay, not lenartorwhateverishisname guy that made systemd
L60[02:57:01]
<Saphire>
But at the very very least, idiot who put gpg-agent.socket file as
ENABLED BY DEFAULT for user
L61[03:13:31] ⇨
Joins: SquidDev
(~SquidDev@host86-151-226-195.range86-151.btcentralplus.com)
L62[03:21:30] ⇨
Joins: Inari (~Pinkishu@p5DEC61A4.dip0.t-ipconnect.de)
L64[03:50:40] <Izaya> fucking Windows
L65[03:50:45] <Izaya> rundll32.exe is
maxing a core
L66[03:50:49] <Izaya> ah well
L67[03:50:55] <Izaya> let's see what dies
when I kill it
L68[04:26:11] ⇦
Quits: Deamon (~Deamon@irc.thevoxelbox.com) (Ping timeout: 204
seconds)
L69[04:40:44] ⇦
Quits: AshIndigo (uid202308@id-202308.charlton.irccloud.com) (Quit:
Connection closed for inactivity)
L70[04:58:31] ⇦
Quits: xarses_ (~xarses@67.218.117.197) (Ping timeout: 186
seconds)
L71[04:59:09] ⇦
Quits: XDjackieXD (~XDjackieX@navi.chaosfield.at) (Quit: bye
o/)
L72[05:01:46] ⇨
Joins: XDjackieXD (~XDjackieX@navi.chaosfield.at)
L73[05:01:46] zsh
sets mode: +v on XDjackieXD
L75[05:19:12]
<Mettaton_Fab> oh no
L76[05:21:00] ⇨
Joins: Nathan1852
(~Nathan185@HSI-KBW-149-172-252-166.hsi13.kabel-badenwuerttemberg.de)
L77[05:28:04] <Inari> AWS doesn't want my
money
L78[05:44:06]
<Mettaton_Fab> my phone is bricked
L79[05:45:24] <XDjackieXD> @Mettaton_Fab
how?!
L80[05:45:38]
<Mettaton_Fab> bootlooping
L81[05:45:43]
<Mettaton_Fab> a lot
L82[05:45:47] <XDjackieXD> cleared cache
already?
L83[05:45:52]
<Mettaton_Fab> while heating itself
up
L84[05:46:00]
<Mettaton_Fab> nope, still need to do
that
L85[05:46:18] <XDjackieXD> clear cache. if
that doesn't help, create nandroid backup and do a clean
flash
L86[05:46:38] <XDjackieXD> (you can use
titanium backup to restore apps and data from the anndroid
backup)
L87[05:46:43]
<Mettaton_Fab> so clearing cache might
help?
L88[05:46:51] <XDjackieXD> it often helps.
yes.
L89[05:47:40]
<Mettaton_Fab> i am currently backing up my
whole phone to my microSD card
L90[05:48:24] <XDjackieXD> don't forget to
also backup /sdcard
L91[05:48:30] <XDjackieXD> (itnernal
storage)
L92[05:48:37]
<Mettaton_Fab> i wanna do that
L93[05:48:53]
<Mettaton_Fab> i might also update the
custom ROM on my phone
L94[05:49:08] <XDjackieXD> what phone and
rom do you have?
L95[05:50:01]
<Mettaton_Fab> Galaxy S4, Resurrection
Remix
L96[05:50:29] <XDjackieXD> ah ok
L97[05:52:00]
<Mettaton_Fab> because stock ROM was not
what i liked
L98[06:03:17] <Izaya> samsung stock rom
seems to tend to suck
L99[06:08:00]
<Mettaton_Fab> for the Galaxy S4 its
Android 5.0.1
L100[06:08:25]
<Mettaton_Fab> if you want a better android
you need to get a custom ROM or a new phone
L101[06:11:20]
<Wuerfel_21>
welp, my taskbar has 3 pages again o.O
L102[06:12:36] <Izaya> use workspaces
more
L103[06:13:14]
<Mettaton_Fab> maybe you should use less
programs at the same time
L104[06:13:48]
<Wuerfel_21>
here in windows-land we peasants lack such luxury
L105[06:14:21] <Izaya> install a better
OS
L106[06:14:35]
<Wuerfel_21>
also, blame everyone for not making a single good bitmap
editor
L107[06:15:01]
<Wuerfel_21>
having to copy-paste between gimp,paint.net and graphicsgale is
FUUUUUNNNN
L108[06:17:24]
<Wuerfel_21>
and doom builder takes ages to load a map, so it too is mostly kept
open
L109[06:17:52]
<Wuerfel_21>
and then theres at any time at least one instance of Audacity
open
L110[06:19:07]
<Wuerfel_21>
and MultiMC, Task Manger, XMplay and 3 windows worth of chrome with
~50 tabs each
L111[06:20:16] <XDjackieXD> what's your
problem with gimp for editing bitmaps?
L112[06:20:32]
⇨ Joins: AshIndigo
(uid202308@id-202308.charlton.irccloud.com)
L113[06:21:49]
<Mettaton_Fab> do not use chrome, use
firefox 64-bit edition
L114[06:22:11] *
AshIndigo shrinks away with opera
L115[06:22:16] <XDjackieXD> lel
L116[06:22:27] <XDjackieXD> I like my
firefox developer edition :>
L117[06:22:41]
<Mettaton_Fab> opera is good too
L118[06:22:53] <XDjackieXD> (but
electrolysis hit firefox stable a few days ago so stable should be
much faster in the last release
L119[06:22:55]
<Mettaton_Fab> i have a windows 8.1 install
with opera here too!
L120[06:23:14] <XDjackieXD> win8.1? why
though?!
L121[06:23:59]
<Mettaton_Fab> got it from a girl in my
class because her clearly windows 7 class machine which had windows
8.1 installed from factory was too slow
L122[06:24:16]
<Mettaton_Fab> so i installed ubuntu on a
spare HDD i had laying around
L123[06:24:21]
<Mettaton_Fab> and now its toast
L124[06:27:30]
<Mettaton_Fab> the father of another girl
in my class has a computer shop
L125[06:27:58]
<Mettaton_Fab> also, should i wipe the
dalvik cache too?
L126[06:28:51]
<Wuerfel_21>
XDjackieXD it is generally cumbersome to use, compared to
paint.net, but unlie paint.net, it can handle paletted files in a
meaningful way, and dither down truecolor images to palettes. But
hand-editing the paletted images is annoying, since most tools wont
work. So I have to use Graphicsgale for editing those.
L127[06:29:17]
<Wuerfel_21>
XDjackieXD it is generally cumbersome to use, compared to
paint.net, but unlike paint.net, it can handle paletted files in a
meaningful way, and dither down truecolor images to given palettes.
But hand-editing the paletted images is annoying, since most tools
wont work. So I have to use Graphicsgale for editing those.
L128[06:29:45] <XDjackieXD> I like gimp
better than paint.net but I don't really work with paletted files
often
L129[06:30:37]
<Wuerfel_21>
i do all the time
L131[06:33:28] ⇦
Quits: SquidDev
(~SquidDev@host86-151-226-195.range86-151.btcentralplus.com) (Ping
timeout: 204 seconds)
L132[06:33:37] <AshIndigo> I use paint.net
because its the one I'm most used too
L133[06:33:51] <AshIndigo> I don't need to
edit images that much though :/
L134[06:34:31]
<Wuerfel_21>
paint.net also has lots of neat plugins
L135[06:34:42]
<Wuerfel_21>
like "Outline Object"
L136[06:35:59]
⇨ Joins: SquidDev
(~SquidDev@host86-151-226-195.range86-151.btcentralplus.com)
L137[06:39:20]
<Wuerfel_21>
if paint.net had palette functionality, it would be the best editor
ever
L138[06:39:55]
<Mettaton_Fab> only dalvik and normal cache
is what i have to wipe?
L139[06:40:06] <XDjackieXD> yes
L140[06:40:26]
<Mettaton_Fab> lets reboot it
L141[06:40:36] <XDjackieXD> if that
doesn't help you will have to do a clean flash
L142[06:41:23] <XDjackieXD> you didn't use
substratum did you?
L143[06:44:30] ⇦
Quits: Icedream (~icedream@has.streaminginter.net) (Quit: A lol
made me boom.)
L144[06:45:32]
<Mettaton_Fab> i used TWRP to clear the
cache
L145[06:45:39]
<Mettaton_Fab> still bootlooping tho
L146[06:46:02]
⇨ Joins: Icedream
(~icedream@has.streaminginter.net)
L147[06:46:08] <XDjackieXD> yeah twrp is
fine. I meant the substratum theme engine as it was causing
bootloops for me a few weeks ago :P
L148[06:46:15] <XDjackieXD> what did you
do before the bootlooping startet?
L149[06:46:56]
<Mettaton_Fab> i just used it as i normally
do
L150[06:47:10] <XDjackieXD> not flashed
anything or isntalled anything that needed root?
L151[06:47:15]
<Mettaton_Fab> i just wanted to check my
notifications
L152[06:47:32]
<Mettaton_Fab> but it seems that it got
spammed with notifications
L153[06:47:40] <XDjackieXD> o.O
L155[07:07:51] <XDjackieXD> ^^
L156[07:08:40]
<Wuerfel_21>
youtube just turned solid black. Video continues to play. I think
my PC wants to tell me something
L157[07:09:01] <AshIndigo> %stab
YouTube
L158[07:09:02] *
MichiBot strikes YouTube with MagIc doing
[9] damage
L159[07:09:16] <XDjackieXD> @Wuerfel_21
have you tried turning it off and on again? :P
L160[07:10:19]
<Wuerfel_21>
will try soon
L161[07:10:50]
<Wuerfel_21>
after trying to explain to a certain person, that there is some
nuance between wispering and shouting
L162[07:11:47] *
Inari puts a cute ribbon bow onto Temia's tail tuft
L163[07:19:26] *
Forecaster shouts "There is?!"
L164[07:20:02] *
Forecaster yells into a notebook
L165[07:35:29] *
XDjackieXD gives Inari some more ribbons to put on
people
L166[07:38:31] ⇦
Quits: Nathan1852
(~Nathan185@HSI-KBW-149-172-252-166.hsi13.kabel-badenwuerttemberg.de)
(Ping timeout: 186 seconds)
L167[07:39:22]
<Mettaton_Fab> so now my phone seems to be
really fucked
L168[07:39:32]
<Mettaton_Fab> it will no longer boot to
unlock screen
L169[07:39:45]
<Mettaton_Fab> but i cant get at my data
that i have on it
L170[07:40:03] <XDjackieXD> if you've done
a backup do a complete clean flash (wipe system & data, install
new system)
L171[07:40:24]
<Mettaton_Fab> but iw ant my data
L172[07:40:32]
<Mettaton_Fab> but i want my data
L173[07:40:50] <XDjackieXD> you can
restore app data from the nandroid backup using titanium backup
pro
L174[07:41:02]
<Mettaton_Fab> my other data like puictures
and such
L175[07:41:10]
<Mettaton_Fab> thats what i want
L176[07:41:11] <XDjackieXD> this is stored
on /sdcard
L177[07:41:25] <XDjackieXD> and /sdcard
isn't the data partition
L178[07:41:37] <XDjackieXD> so a data wipe
won't affect stuff in /sdcard
L179[07:41:42]
<Mettaton_Fab> lets boot into
recovery
L180[07:41:46] <XDjackieXD> make sure to
keep backups of those too though
L181[07:42:16] <XDjackieXD> there are two
types of people: those who never lost data and those who keep
backups :P
L182[07:43:17]
<Mettaton_Fab> so wiping data will wipe the
folder called data?
L183[07:44:08]
<Wuerfel_21>
FYI, TWRP(?) helped me with my borxd phone once
L184[07:44:10] <XDjackieXD> yes. well.
depends on your device. most of them have /sdcard and /data as one
partition and wiping data will actually delete the folder content.
some older devices have /data as a separate partition that just
gets reformattet on a data wipe
L185[07:44:49] <XDjackieXD> in TWRP select
advanced wipe and wipe data and cache and if you got the zip for
your rom and gapps if you had them installed then you can also wipe
/system and do a complete fresh install
L186[07:45:12] <XDjackieXD> and again:
keep backups of everything important on that phone
L187[07:45:35] <XDjackieXD> best would be
nandroid backup of everything and a copy of /sdcard (as /sdcard
isn't included in an nandroid backup)
L188[07:45:53] <XDjackieXD> oh and
rpeferably backups to external media
L189[07:45:59]
<Mettaton_Fab> there is /data, /system and
more
L190[07:46:13]
<Mettaton_Fab> as well as /sdcard
L191[07:46:15]
<Mettaton_Fab> and /external_sd
L192[07:46:29] <XDjackieXD> don't touch
anything else apart from system, data and cache in the wipe
options
L193[07:46:44] <XDjackieXD> external_sd is
the sd card, /sdcard is the internal storage
L194[07:46:55]
<Mettaton_Fab> /system seems to be
empty
L195[07:47:07] <XDjackieXD> yes because
twrp doesn't mount it per default.
L196[07:47:12] <XDjackieXD> just use the
wipe menu of twrp
L197[07:47:19] <XDjackieXD> don't delete
those things manually
L198[07:47:46] <XDjackieXD> (main menu
-> wipe -> advanced wipe)
L199[07:48:09]
<Mettaton_Fab> so i need to wipe Dalvik/ART
cache, System, Data and Cache?
L200[07:48:09]
<Mettaton_Fab> so i need to wipe Dalvik/ART
cache, System, Data and Cache?
L201[07:48:31] <XDjackieXD> if you got the
rom and gapps zip file yes. if not don't wipe system
L202[07:48:53]
<Mettaton_Fab> i do not have gapps rn
L203[07:49:02] <XDjackieXD> then just the
rom zip ^^
L204[07:49:16]
<Mettaton_Fab> so i should not wipe
system
L205[07:49:34] <XDjackieXD> if you don't
have a flashable zip for your rom, don't wipe /system
L206[07:49:46] <XDjackieXD> of you got one
wipe /system and flash the zip before rebooting
L207[07:51:04]
<Mettaton_Fab> i have the ROM zip but not
gapps as that is on my old tower PC which cant be accessed until i
have a new mainboard
L208[07:51:21] <XDjackieXD> oh.
L209[07:51:29] <XDjackieXD> don't wipe
/system in that case :P
L210[07:51:35]
<Mettaton_Fab> the ROM is on my
laptop
L211[07:51:51]
<Mettaton_Fab> and downloading openGapps
with 56k speeds is bad
L212[07:52:06] <XDjackieXD> lol. nice
internet connection xD
L213[07:52:14]
<Mettaton_Fab> normally my internet is fats
but today its 7KB/s
L214[07:52:15]
<Wuerfel_21>
dial-up FTW!
L215[07:52:21]
<Mettaton_Fab> *fast
L216[07:52:27] <XDjackieXD> good enough
for irc! :P
L217[07:52:30]
<Mettaton_Fab> and its not dial-up
L218[07:52:51]
<Mettaton_Fab> so dalvik, data and cache
are what i need to wipe?
L219[07:53:56] <Corded> *
<Wuerfel21> _did a joke. it was not funny. she is not
particulary funny in general. just ignore her.
L220[07:54:37] <Inari> This anime is
getting surprisingly good - especially for whats basically a kid's
show
L221[07:54:43]
<Mettaton_Fab> you tried to do a joke but
it failed
L222[07:54:44] <Inari> (Sugar Sugar Rune
that is)
L223[07:55:03] <XDjackieXD> Mettaton_Fab:
yes. this will wipe all settings and all apps plus their data. to
restore apps you will need titanium backup pro (idk if there are
other tools to restore apps from a nandroid backup but the 2€ are a
good investment)
L224[07:55:22]
<Mettaton_Fab> what about Miss Kobayashi's
Dragon Maid?
L225[07:55:39]
<Mettaton_Fab> i used the normal version to
do a backup of my files
L226[07:55:55] <XDjackieXD> ah ok if you
got a titanium backup backup you are fine.
L227[07:56:05] <Inari> Dragon maid is
nice, but different. :P
L228[07:56:28]
<Mettaton_Fab> so i should just wipe the
above mentioned partitions?
L229[07:56:41] <XDjackieXD> yes
L230[07:57:10]
<Mettaton_Fab> and now?
L231[07:57:13]
<Mettaton_Fab> reboot?
L232[08:01:44] ***
alfw|Off is now known as alfw
L233[08:01:45]
<Mettaton_Fab> lets wait for the famous
windows sound that says that a device has been conencted
L234[08:03:22]
<Mettaton_Fab> it boots!
L235[08:19:26]
⇨ Joins: Vexatos
(~Vexatos@eduroam-pool13-1801.wlan.uni-bremen.de)
L236[08:19:27]
zsh sets mode: +v on Vexatos
L237[08:22:46] ⇦
Quits: Vexatos (~Vexatos@eduroam-pool13-1801.wlan.uni-bremen.de)
(Client Quit)
L238[08:24:36]
<Mettaton_Fab> and now its reinstalling my
apps for me
L239[08:35:00]
⇨ Joins: Nathan1852
(~Nathan185@HSI-KBW-149-172-252-166.hsi13.kabel-badenwuerttemberg.de)
L240[08:36:31] ⇦
Quits: Nathan1852
(~Nathan185@HSI-KBW-149-172-252-166.hsi13.kabel-badenwuerttemberg.de)
(Read error: Connection reset by peer)
L241[08:55:05] <AmandaC> %choose kidnap or
let sleep
L242[08:55:06] <MichiBot> AmandaC: let
sleep
L243[08:55:08] <AmandaC> hrm
L244[08:55:11] <AmandaC> oh fine
L245[08:55:33] <Inari> L-lewd
L246[08:59:32] *
AmandaC baps Inari
L247[09:13:20]
<Mettaton_Fab> ? ? ?
L248[09:13:22] <Temia> muuu. z.z
L249[09:14:14] <Izaya> krita pls
L250[09:20:42] *
vifino pets Temia
L251[09:23:47] <vifino> Izaya: You drawing
something?
L252[09:24:00] <Izaya> yeah
L253[09:24:04] <Izaya> doing some
assignments
L254[09:24:23] <Izaya> (ab)using the
graphics tablet
L255[09:24:44] <Skye> My backups were
frantically made when i was fixing something that broke
L256[09:25:11]
<Mettaton_Fab> i also transferred music
onto my phone via bluetooth
L257[09:25:23]
<Mettaton_Fab> much more stable than
USB
L258[09:25:25]
<Mettaton_Fab> and faster!
L259[09:25:28] <Izaya> nah
L260[09:25:37] <Izaya> adb push is the
best way to copy files to a phone
L261[09:25:57]
<Mettaton_Fab> well for me its faster since
i dont want to use any onther programs for that
L262[09:25:58] <vifino> I second
that.
L263[09:26:15]
<Mettaton_Fab> bluetooth is fats enough for
m< taste
L264[09:26:18]
<Mettaton_Fab> *my
L265[09:26:24] <Izaya> adb push is
like,
L266[09:26:26] <Izaya> it's adb
L267[09:26:31] <Izaya> you were just
talking about using it
L268[09:26:43] <Izaya> ???
L269[09:27:03] <Inari> %pet AmandaC
L270[09:27:04] *
MichiBot pets AmandaC with Pillows. AmandaC recovers 2
health!
L271[09:27:10] <Izaya> bluetooth always
seemed super flaky, too
L272[09:27:16]
<Mettaton_Fab> %pet Inari
L273[09:27:17] *
MichiBot pets Inari with a prescribed object. Inari recovers 1
health!
L275[09:27:35] <Lizzy> hmm
L276[09:27:44] <Izaya> it's almost okay on
Linux as long as you don't want to use obex
L277[09:27:49] <Lizzy> running chrome and
pycharm are making my laptop cpu toasty
L278[09:27:58] <Izaya> it's unusable on
Windows IME though
L280[09:28:08]
<Mettaton_Fab> seems legit like that time i
built my amp on a PCB instead of a breadboard
L281[09:28:09] <MichiBot>
RASPUTIN -
Vladimir Putin - Love The Way You Move (Funk Overload)
@slocband | length:
3m 59s | Likes:
173,746 Dislikes:
6,734 Views:
13,673,839 | by
Pace
Audio | Published On 6/4/2016
L282[09:29:09] <Izaya> I think I'm doing
this class wrong
L283[09:29:15] <Izaya> it's all about
using like
L284[09:29:28] <Izaya> InDesign and
Photoshop
L285[09:29:38] <Izaya> I'm doing
assignments with LaTeX and Krita
L286[09:29:53] <Syrren> that sounds like
you're doing it right
L287[09:29:55] <Syrren> at least the LaTeX
bit
L288[09:30:01] <Izaya> either very right
or very wrong
L289[09:31:14] ⇦
Quits: SquidDev
(~SquidDev@host86-151-226-195.range86-151.btcentralplus.com) (Quit:
<quit message here>)
L290[09:31:34]
<Mettaton_Fab> any good program to layout
PCBs other than Lochmaster?
L291[09:31:43] <AshIndigo> Eagle?
L292[09:31:44]
<Mettaton_Fab> because lochmaster is easy
to use for me
L293[09:32:04] <vifino> KiCad's
PCBNew?
L294[09:32:15] <Izaya> Guessing you'll say
you don't want to use KiC- goddamnit
L295[09:32:24] *
vifino high-fives Izaya
L296[09:32:35]
<Mettaton_Fab> just something thats
userfriendly for newbies
L297[09:32:37] *
Izaya high-fives vifino
L298[09:38:39] *
Lizzy snuggles vifino
L299[09:39:38] ⇦
Quits: Cazzar (~CazzarZNC@vocaloid.lovers.at.cazzar.net) (Quit: ZNC
- http://znc.in)
L300[09:39:38] ⇦
Quits: Reika (~Reika@reika.kalseki.mods.abrarsyed.com) (Quit: ZNC -
http://znc.in)
L301[09:41:03]
⇨ Joins: xarses_ (~xarses@67.218.117.197)
L302[09:41:31]
⇨ Joins: Cazzar
(~CazzarZNC@vocaloid.lovers.at.cazzar.net)
L303[09:41:31]
zsh sets mode: +v on Cazzar
L304[09:41:48]
⇨ Joins: Reika
(~Reika@reika.kalseki.mods.abrarsyed.com)
L305[09:42:23]
⇨ Joins: andreww (~xarses@67.218.117.197)
L306[09:44:56] ⇦
Quits: xarses_ (~xarses@67.218.117.197) (Ping timeout: 180
seconds)
L307[09:45:27]
⇨ Joins: xarses_ (~xarses@67.218.117.197)
L308[09:46:38] ⇦
Quits: andreww (~xarses@67.218.117.197) (Ping timeout: 204
seconds)
L309[09:46:47]
⇨ Joins: andreww (~xarses@67.218.117.197)
L310[09:48:05] <XDjackieXD> @Mettaton_fab
KiCad is user friendly and there are tons of "getting
started" tutorials
L311[09:48:27]
<Mettaton_Fab> user friendly for a total
beginner who never designed a board
L312[09:48:33]
<Mettaton_Fab> thats what i need
L313[09:48:56] <XDjackieXD> there's not
really anything like that eccept for frizzing but it is pretty
crappy
L314[09:49:10] ⇦
Quits: xarses_ (~xarses@67.218.117.197) (Ping timeout: 204
seconds)
L315[09:49:16] <XDjackieXD>
*fritzing
L316[09:50:04]
⇨ Joins: xarses_ (~xarses@67.218.117.197)
L317[09:51:04] ⇦
Quits: andreww (~xarses@67.218.117.197) (Ping timeout: 204
seconds)
L318[09:51:13]
⇨ Joins: andreww (~xarses@67.218.117.197)
L319[09:53:01]
⇨ Joins: BearishMushroom
(~BearishMu@90-231-174-194-no159.tbcn.telia.com)
L320[09:54:14] ⇦
Quits: xarses_ (~xarses@67.218.117.197) (Ping timeout: 204
seconds)
L321[09:54:28]
⇨ Joins: xarses_ (~xarses@67.218.117.197)
L322[09:54:52] ⇦
Quits: andreww (~xarses@67.218.117.197) (Ping timeout: 204
seconds)
L323[09:55:35]
⇨ Joins: andreww (~xarses@67.218.117.197)
L324[09:56:45] <vifino> XDjackieXD:
Fritzing /is/ pretty neat for neat for what it does. Making
electronic design accessible to anyone in the spirit of
Arduino.
L325[09:58:40] ⇦
Quits: xarses_ (~xarses@67.218.117.197) (Ping timeout: 204
seconds)
L326[09:58:57]
⇨ Joins: xarses_ (~xarses@67.218.117.197)
L327[09:59:12] <XDjackieXD> vifino: yes
but boards designed with it look horrible and "useful
workflow" is something they never heard of
L328[09:59:18] ⇦
Quits: andreww (~xarses@67.218.117.197) (Ping timeout: 204
seconds)
L329[10:00:03]
⇨ Joins: andreww (~xarses@67.218.117.197)
L330[10:03:06] ⇦
Quits: xarses_ (~xarses@67.218.117.197) (Ping timeout: 204
seconds)
L331[10:03:10]
⇨ Joins: xarses_ (~xarses@67.218.117.197)
L332[10:03:44] ⇦
Quits: andreww (~xarses@67.218.117.197) (Ping timeout: 204
seconds)
L333[10:05:26]
<Mettaton_Fab> i just wanna build a tiny
amplifier board
L334[10:05:43]
<Mettaton_Fab> maybe for 2 mono amps so i
have stereo amplification
L335[10:15:35] ⇦
Quits: turtledude01
(turtledude@71-89-110-94.dhcp.stpt.wi.charter.com) (Ping timeout:
200 seconds)
L336[10:19:37]
⇨ Joins: Turtle
(~SentientT@ip5657cbb2.direct-adsl.nl)
L337[10:24:05] <Turtle> Heh, load()
L338[10:24:17] <Turtle> If only Lua
remembered source code
L339[10:24:31]
⇨ Joins: Deamon (~Deamon@irc.thevoxelbox.com)
L340[10:26:32]
<Dudblockman> Wdym?
L341[10:32:33] <Michiyo> huh.. so no more
attribute points in 4.0...
L342[10:32:38] <Michiyo> I should keep up
with changes better ._.
L343[10:33:14] <Temia> Yep.
L344[10:33:33] <Temia> No more SMN/SCH
attribute conflict as a result.
L345[10:33:45] <Michiyo> I'm going to have
to wait for the wikis to update, to update my app..
L346[10:33:52] <Michiyo> hopefully they
update soon ™ lol
L347[10:34:15] <Temia> Gamerescape will
slow to a crawl as the data updates.
L348[10:34:44] <Temia> (well, even slower
than it already is lol)
L349[10:34:48] <Michiyo> lol
L350[10:34:49] <Michiyo> right?
L351[10:35:11] <Michiyo> I'll have to get
Forecaster to update his program he made for me.. :P
L352[10:35:35]
<Dudblockman> I like my little tweak to the
drone proxy. I replaced drone.move with a variant that
automatically waits for it to complete and tracks the
position
L353[10:36:10] <Temia> Also I did a lot of
Stoneskin spamming to see the spell off.
L354[10:36:29] <Temia> Not a soul escaped
without lithified flesh in Revenant's Toll +_+
L355[10:36:39] <Temia> (Even I am not
crazy enough to try and do that in Idyllshire though)
L356[10:46:28] <Izaya> it never occurred
to me that lua strings are immutable
L357[10:47:03] <Izaya> but you never
actually modify them, you just define a new one over the top
L358[10:47:40] <Izaya> also uh
L359[10:47:57] <Izaya> can anyone tell me
if this is a sane way to do auth?
L360[10:48:05] <Izaya> so a and b have a
password
L361[10:48:38] <Izaya> a generates a
random salt, and sends it to b
L362[10:48:51] <Izaya> a and b both has
password + hash
L363[10:49:07] <Izaya> wait
L364[10:49:17] <Izaya> a and b both hash
password + salt rather
L365[10:49:30] <Syrren> Izaya: are Alice
and Bob's passwords the same?
L366[10:49:37] <Izaya> yes
L367[10:49:45] <Izaya> this is for
auth
L368[10:49:54] <Syrren> is Alice or Bob a
"server" and "client"?
L369[10:50:00] <Syrren> s/and/or/
L370[10:50:00] <MichiBot> <Syrren>
is Alice or Bob a "server" or "client"?
L371[10:50:10] <Izaya> a = server, b =
client
L372[10:50:32] <Izaya> so b sends a
hashed(password + salt)
L373[10:50:44] <Izaya> a checks it against
its own result
L374[10:50:55] <Syrren> Alice generates an
asymmetric keypair, sends the public key to Bob. Bob encrypts
password with public key, sends to Alice. Alice decrypts, hashes,
compares to stored hash.
L375[10:50:55] <Izaya> and if it matches
that auth was successful
L376[10:51:21] <Izaya> trying to do this
in plain Lua
L377[10:51:30] <Syrren> That should
protect against passive MITM, but not active MITM -- for the latter
you need a Trent (PKI)
L378[10:51:33] <Izaya> so I'm working with
like, crc32 or sha1
L379[10:52:03] <Syrren> you need a 'secure
channel' to send the password over, so it's not intercepted
L380[10:52:19] <Izaya> hashing not enough
to do that, even with random salt?
L381[10:52:22] <Syrren> current
implementations rely on either asymmetric cryptography (HTTPS) or
physical security
L382[10:52:38] <Syrren> hashing and salt
are for data-at-rest
L383[10:52:55] <Izaya> welp
L384[10:52:57] <Izaya> :|
L385[10:53:00] <Syrren> if you have Bob
sending a hashed password to Alice... then the hashed password *is*
the password
L386[10:53:02] <Syrren> get what I
mean?
L387[10:53:06] <Temia> Some degree of
randomness is going to be required to prevent just echoing sniffed
packets at a later date.
L388[10:53:15] <Izaya> hence random
salt
L389[10:53:23] <Syrren> yes... but you
have to send the salt with the hash.
L390[10:53:29] <Temia> Ah, I missed the
part where the salt is random
L391[10:53:38] <Syrren> or generate the
salt based on a common value (e.g. time)
L392[10:53:41] <Syrren> this is where it
gets interesting.
L393[10:54:09] <Syrren> IIRC, TOTP is
pretty much time-based salt + challenge-response
L394[10:54:24] *
Izaya hmms
L396[10:56:22] <Izaya> that'd be
doable
L397[10:56:27] <Syrren> Izaya: seriously
though, the first rule of secure programming is to avoid designing
your own algorithms, and avoid implementing existing ones too --
use a battle-tested library if at all possible.
L398[10:56:43] <Izaya> not really
L399[10:56:55] <Izaya> none will work on
MultICE
L400[10:57:13] <Syrren> there are some
pure-lua libs for things like compression iirc
L401[10:59:32]
⇨ Joins: Cervator
(~Thunderbi@2601:4c1:4000:1050:1c:766e:b019:3794)
L402[11:00:05]
⇨ Joins: turtledude01
(turtledude@71-89-110-94.dhcp.stpt.wi.charter.com)
L406[11:29:49]
<Dudblockman> Here you go Inari
L407[11:29:58] <vifino> Michiyo: I got
really confused as what attribute points are in LLVM 4.0 until I
realized you weren't talking about LLVM.
L408[11:30:02] *
vifino shrugs
L409[11:30:05] <Inari> I know that site
:P
L410[11:30:50]
<Dudblockman> You download enough rem to
satisfy your needs already?
L411[11:30:56]
<Wuerfel_21>
hmm, messing with keycodes (and decimal dmesg output) made me find
out that 53 == 0x35
L412[11:31:29]
<Dudblockman> Hmm. Funny.
L413[11:32:05]
<Wuerfel_21>
AAAnd that the key with code 53 produces character 35
L414[11:32:15] <Temia> Heehee, I love
seeing what conclusions people draw in lieu of context
L415[11:32:34] <Temia> Though after a
little while I do try to be fair and namedrop some searchable
keywords to narrow it down, like the town names
L416[11:33:08]
<Dudblockman> There are only 10 types of
people in this world... those who understand binary and those who
don't (and ones who understand base 3, 4, 5, 6, etc.)
L417[11:33:38]
<Wuerfel_21>
also, pow(3,3) + 42 == 69
L418[11:34:34]
<Wuerfel_21>
sexy illuminati confirmed
L420[11:47:16]
⇨ Joins: DaMachinator
(webchat@185-2-111-208-in-addr-arpa.omnispring.net)
L422[11:53:56] <S3> vifino: can we has an
elixir cpu?
L423[11:54:00] <S3> that would be so
nice
L424[11:56:14] <vifino> ???
L425[11:56:52] <S3> instead of lua
L426[11:56:57] <S3> using elixir for our
OC stuff
L427[11:57:33] <payonel> Inari: while that
cat is adorable it makes me concerned what they are doing to put it
in that crazed state
L428[11:57:47] <S3> I just took a picture
of my kitty
L430[11:58:39] <vifino> S3: That just
plainly doesn't work, erlang is practically impossible to implement
in hardware.
L431[11:59:16] <S3> Got a better one
L433[11:59:46] <S3> vifino: why do you say
that?
L434[11:59:54] <S3> it's just a matter of
sandboxing and API calls
L435[12:00:06] <vifino> Oh, you weren't
talking about actual hardware.
L436[12:00:17] <S3> no I meant as an OC
arch
L437[12:00:36] <Inari> payonel: hehe
L438[12:01:23] <vifino> Still, it's not
really easy, since BEAM, Erlang and OTP have not been designed to
make this accessible.
L439[12:02:48] <S3> what about embedded
elixir?
L441[12:03:09] <S3> eex runs on Java
L442[12:03:22] <S3> or it can I've heard
*
L443[12:03:52] ⇦
Quits: Nachtara (~Nachiebre@173-22-110-5.client.mchsi.com) (Quit:
Always save before encountering a shiny.)
L444[12:06:22] <vifino> isn't that a
distribution of some sort that just gets erlang/elixir going on
raspberry pis?
L445[12:07:27] <S3> Agaik it's a thing
that it's you evaluate elixir coffee in strings
L446[12:07:38] <S3> For use say in web
dev
L447[12:08:38] <vifino> You make no god
damn sense.
L448[12:09:11] <S3> woah wtf phone
L449[12:09:20] <S3> elixir code in
strings*
L451[12:09:40] <S3> and I think it lets
you query the ATP
L452[12:10:32] <vifino> ATP?
L453[12:10:55] <S3> I think that's the
token tree erlang compiles down to
L454[12:11:39] <S3> or elixir or
something
L455[12:12:16] <vifino> These are in no
way related to any form of sandboxing.
L456[12:12:48] <S3> it doesn't have to
be
L457[12:14:45] <Skye> so uh
L459[12:17:30] <S3> Skye: vifino likes to
just idle there in elixir-lang
L460[12:17:47] <S3> that channel seriously
needs an idlerpg bot
L461[12:18:04] <Skye> I'm going to do a
project for school "computer science", I'm going to use
erlang, it's also an idea I can't find on google, so I am going to
be doing something that is relatively that I can't find software
for. O_o
L462[12:18:15] <vifino> I doubt that will
let you query any syntax trees in an accessible way, you probably
mean the ETS, which is entirely different.
L463[12:18:24] <Inari> Skye: Whats
that?
L464[12:18:25]
⇨ Joins: ikrvlad (webchat@176.100.113.90)
L465[12:18:25] <vifino> S3: And?
L466[12:18:41] ⇦
Quits: ikrvlad (webchat@176.100.113.90) (Client Quit)
L467[12:18:58] <Skye> Inari, todo
graph.
L468[12:19:00] <vifino> Skye: Can you
rephrase?
L469[12:21:26] <Skye> basically... I have
an idea that is a todo list that is a graph (like that data
structure), that I will do for part of the so called "computer
science" qualification as the project. I also want to use
erlang for it. :P
L470[12:22:03] <Inari> Your school is
weird
L471[12:22:22] <vifino> Not only is that
an absolutely simplistic thing but also something erlang isn't good
at and where none of it's good features have any effect.
L472[12:22:30] <vifino> Good job, you're
being stupid.
L473[12:23:37] <Inari> Erlang is good for
high concurrency as far as I recall?
L474[12:23:49] <vifino> Yes.
L475[12:23:51] <Skye> vifino, for
something simplistic it's not something already done in a neat
tool.
L476[12:24:19] <S3> vifino: someday,
somebody is going to create a giant ascii art picture of you trying
to use visual basic to write an operating system and calling it
efficient.
L477[12:24:39] <Skye> I wanted to use
erlang to learn erlang.
L478[12:24:40] <S3> just because you think
that everything is stupid :P
L480[12:25:48] <vifino> Erlang is the
wrong tool for the job. Don't use the wrong tools.
L481[12:26:04] <Skye> vifino, I'm sure as
hell not using JavaScript.
L482[12:26:40] <vifino> Oh, wow, one of
the three examples use javascript for the frontend.
L483[12:26:54] <Skye> I mean I'm not going
to use node.js
L484[12:26:57] <vifino> TOTALLY MAKES MY
POINT THAT IT'S THE WRONG TOOL FOR THE JOB GO AWAY.
L485[12:27:13] <S3> vifino: wrong tools
are good
L486[12:27:16] <Inari> Why not js
L487[12:27:18] <Skye> It can't be a CLI
because the examiners will go "not advanced enough"
L488[12:27:32] <S3> the other day I used a
25 pound pipe wrench to change a flat tire
L489[12:27:51] <S3> worked better than the
tools that came with the car
L490[12:28:03] <vifino> Shit like this
makes fanboys lose.
L491[12:28:27] <Skye> I'm not a
fanboy.
L492[12:28:37] <vifino> In a way, that's
disrespectful to the unix philosophy as well.
L493[12:28:37] <S3> I think vifino needs
some more cp'n crunch or something
L494[12:28:41] <S3> he's kinda grumpy
today
L495[12:28:55] <Inari> He needs more Lizzy
to fondle
L496[12:29:23] *
Lizzy will not comment
L498[12:29:40] <vifino> S3: I just want
people to stop trying to use a chainsaw to put a nail in.
L499[12:29:55] <S3> but that's so much
fun
L500[12:29:58] <vifino> Especially when
they have no god damn reason to use a chainsaw in the first
place.
L501[12:30:00] *
Lizzy snuggles vifino and offers him some of her fish
L502[12:30:02] <S3> you've never done
that?
L503[12:30:11] <Skye> what do you suggest
I do?
L504[12:30:19] <S3> I suggest you use what
you want
L505[12:30:23] <S3> and ignore
vifino
L506[12:30:44] <S3> kids don't learn by
being told not to put plastic bags over their own heads
L507[12:31:05] <vifino> I suggest you use
what is best for the job or even partially good at it.
L508[12:31:08] <S3> you tell them not to
do it so they do it and they go shit I won't do that again
L509[12:31:30] <S3> so use erlang all you
want :)
L510[12:32:01] <S3> if anything you'll
find something it's useful for that somebody else might not have
realized, and/or the opposite
L511[12:32:14] <CompanionCube> maybe skye
will learn that Erlang isn't exactly suited to this (it most likely
isn't but eh) or maybe they will find that hey, this works nicely
and either way they learn a language
L512[12:32:29] <S3> right
L513[12:32:32] <CompanionCube> in the
first part they'd also learn *why* other than 'it's the wrong
tool'
L514[12:32:41] <S3> right
L515[12:33:22] <Inari> Lizzy: heh :3
L516[12:33:23]
⇨ Joins: alFamaRt
(carrs@ipv6.pisces.panicbnc.net)
L517[12:33:38] <Skye> vifino, the three
things you linked: one is not even implemented, the rest are only
lists. I mean a todo graph. :P
L518[12:33:50] <S3> sometimes it's better
to be one fry short of a happy meal than it is to pretend you know
everything
L519[12:34:17] <vifino> Skye: Aaaand you
completely missed the point.
L520[12:34:42] <S3> one way to be
productive is to just tell Skye erlang might be great for string
manipulation
L521[12:34:46] <S3> and then sit and
watch
L522[12:34:50] <Skye> ha no
L523[12:34:57] <Skye> I know strings are
lists of numbers
L524[12:36:54] <CompanionCube> can't tell
if masochism or schadenfreude
L526[12:37:23] <S3> in C they're just
binaries too
L527[12:37:56] <S3> of course, elixir has
fixed a lot of these issues
L528[12:38:37] <Skye> I want to use erlang
or elixir because I want to make it a webapp (with multiple users
probably). and I hate rewriting code.
L529[12:39:14] <S3> Skye: elixir is great
for webapps!
L530[12:39:59] <Skye> good
L531[12:40:16] <Inari> psh
L532[12:40:18] <Inari> use
shellscript
L533[12:42:45] <gamax92> Inari: I see what
you did there
L534[12:43:07] <Inari> I didn't
L535[12:43:09] <Inari> but thanks
L536[12:43:52]
<Wuerfel_21>
welp, it won't worxorz:
L538[12:43:52]
<Wuerfel_21>
I am looking at this function for ten minutes and cant figure out
what the problem is
L539[12:45:55]
<Wuerfel_21>
now and past are snapshots of boolean-ized bundled redstone inputs.
I want to find inputs that got turned on in the time between past
and now. But it just returns a copy of now
L540[12:46:43] <Inari> Why past[v]?
L541[12:46:51] <payonel> +1 ^
L542[12:46:53] <payonel> past[k] ?
L544[12:47:01] <payonel> ^
L545[12:47:07]
<Wuerfel_21>
?
L546[12:47:29]
<Wuerfel_21>
ouch
L547[12:47:48] <payonel> also, why v and
not past[k] ?
L548[12:47:56] <payonel> that's....the
same thing
L550[12:48:13] <payonel> oh now
L551[12:48:14]
<Wuerfel_21>
v is now[k]
L552[12:48:15] <payonel> nevermind
L553[12:48:22] <Inari> Haha
L554[12:48:33] <payonel> yeah, just listen
to inari
L555[12:48:59] <Inari> Yeah listen to me
and build a tentacle pit
L556[12:49:05] *
payonel gives inari catnip
L557[12:49:12] *
Inari hands it to AmandaC
L558[12:49:21] <payonel> ...you can't just
HAND catnip over
L559[12:49:24] <payonel> stuff makes a
mess
L560[12:49:29] <Inari> xD
L561[12:56:14] <Inari> payonel: I'll paw
it over next time then
L562[13:08:56] <S3> payonel: yes if you
don't freeze it
L563[13:09:05] <S3> freeze it and it won't
dry out
L564[13:09:13] <S3> that's what we
do
L565[13:11:38]
⇨ Joins: Vexatos
(~Vexatos@p5B3C9D9D.dip0.t-ipconnect.de)
L566[13:11:38]
zsh sets mode: +v on Vexatos
L567[13:26:41] *
Michiyo tries not to die
L568[13:28:22] ⇦
Quits: xarses_ (~xarses@67.218.117.197) (Remote host closed the
connection)
L569[13:28:51]
⇨ Joins: xarses_ (~xarses@67.218.117.197)
L570[13:28:55] ⇦
Quits: Sava (~Sava@cable-178-148-185-58.dynamic.sbb.rs) (Ping
timeout: 186 seconds)
L571[13:35:06]
⇨ Joins: Sava
(~Sava@cable-178-148-185-58.dynamic.sbb.rs)
L572[13:45:13]
⇨ Joins: Nathan1852
(~Nathan185@HSI-KBW-37-209-117-136.hsi15.kabel-badenwuerttemberg.de)
L573[14:05:40] <Forecaster> past[a]
L574[14:09:54] <Michiyo> tast[y]
L575[14:12:28] *
AshIndigo takes some of the past[a]
L576[14:14:41]
<Mettaton_Fab> should i get a weller
soldering station or that cheap 65W soldering iron from
china?
L577[14:15:00]
<Mettaton_Fab> that TS-100 one that goes
with up to 24V
L578[14:16:10]
⇨ Joins: SquidDev
(~SquidDev@host86-151-226-195.range86-151.btcentralplus.com)
L579[14:16:56] ⇦
Quits: Sava (~Sava@cable-178-148-185-58.dynamic.sbb.rs) (Ping
timeout: 180 seconds)
L580[14:19:26] <XDjackieXD> the ts-100 is
pretty great.
L581[14:19:40] <XDjackieXD> I tried one a
few days ago and also ordered one.
L582[14:19:47] <AmandaC> ts-100?
L583[14:20:07] <XDjackieXD> AmandaC: a
open source and open schematic soldering iron
L584[14:20:13] <AmandaC> ah
L586[14:20:52] <XDjackieXD> (the tips are
hakko-t12 clones)
L587[14:20:58]
<Mettaton_Fab> so should i get that
one
L588[14:21:20] <XDjackieXD> well you will
probably pay quite a lot more for a weller station of equal
quality
L589[14:21:40] <XDjackieXD> if you want to
get the best thing you can get, get a jbc station with a t-245
handle
L590[14:21:47] <XDjackieXD> (around
300-400€)
L591[14:21:54] <Temia> That looks pretty
nice but just like anything from AliExpress, I am endlessly
cautious
L592[14:22:39]
<Mettaton_Fab> i found a video from a
german youtuber
L593[14:22:56]
<Mettaton_Fab> he showed that its more
powerful than a 80W weller soldering station
L594[14:23:03]
⇨ Joins: Sava
(~Sava@cable-178-148-185-58.dynamic.sbb.rs)
L595[14:24:02] <XDjackieXD> oh I spent a
lot of money on aliexpress stuff so far and the ts-100 is pretty
high quality. don't expect to get anything great for 1€ or less but
everything priced a bit higher is none less quality than if you
bought it in europe.
L596[14:25:10]
<Mettaton_Fab> i just need a new soldering
iron which has a decent amount of power, so do you think that its
good enough for like desoldering components from a multilayer
PCB?
L597[14:25:18] <XDjackieXD> yes
L598[14:26:19] <Forecaster> nah, you need
an orbital laser
L599[14:26:24] <Forecaster> there's no
substitute
L600[14:29:37] <XDjackieXD> lol.
yes.
L601[14:29:56]
<Mettaton_Fab> maybe i will get one for
christmas
L602[14:30:09]
<Mettaton_Fab> and 1kg of leaded solder
aswell
L603[14:36:36]
<Wuerfel_21>
wriing that SID-to-Computronics converter makes me appreciate the
fact that you can find a SID version of almost every song in
existence
L604[14:36:43]
<Wuerfel_21>
writng that SID-to-Computronics converter makes me appreciate the
fact that you can find a SID version of almost every song in
existence
L605[14:40:20]
<Wuerfel_21>
sadly not every SID works with my conversion method
L606[14:42:11]
<Wuerfel_21>
the register dump tool can't handle 1337 haxxxx (illegal opcodes?),
the converter is hardcoded to a 50 hz sample rate, some stuff just
sounds terrible
L607[14:45:53]
<Wuerfel_21>
this reminds me that i have to release the thing at some point
?
L608[15:09:21] <Inari> cherry juice mixed
with water is good too :3
L609[15:11:48] ⇦
Quits: glasspelican (~quassel@stanley.glasspelican.ca) (Remote host
closed the connection)
L610[15:14:57]
<Mettaton_Fab> cherry flavored water ice
tastes great
L611[15:20:51] <raoulvdberge> Is anyone
working on 1.12 OC? :P
L612[15:24:17]
<Dudblockman> What about 1.13 Kappa
L613[15:24:45] <Michiyo> I have a working
port of 1.15 OC locally
L614[15:24:53]
<Dudblockman> .o.
L615[15:24:54] <Michiyo> :P
L616[15:25:11]
<Dudblockman> But have you updated to the
April version of minecraft 2.0?
L617[15:27:51]
<Dudblockman> WAIT THAT WAS 2013
L618[15:27:56]
<Dudblockman> o.o
L619[15:28:35]
⇨ Joins: glasspelican
(~quassel@stanley.glasspelican.ca)
L620[15:34:26] <Michiyo> you know.. people
actually still play that o_O
L621[15:34:30] <Michiyo> there were mods
for it even!
L622[15:36:26] ⇦
Quits: SquidDev
(~SquidDev@host86-151-226-195.range86-151.btcentralplus.com) (Ping
timeout: 180 seconds)
L623[15:56:50] <AshIndigo> ~markov
Inari
L624[15:56:52] <ocdoc> i do know the
center locaiton of a dif you make a 3d printer component stuff i
use -- it doesnt need to be more interesting not to"
L625[16:00:17]
⇨ Joins: andreww (~xarses@67.218.117.197)
L626[16:00:49] ⇦
Quits: andreww (~xarses@67.218.117.197) (Remote host closed the
connection)
L627[16:01:19]
⇨ Joins: andreww (~xarses@67.218.117.197)
L628[16:03:28] ⇦
Quits: xarses_ (~xarses@67.218.117.197) (Ping timeout: 204
seconds)
L629[16:03:29]
<Wuerfel_21>
f*ck "too long without yielding"! THis is the 5th time a
random lag spike made half my computers crash
L630[16:04:16] <Michiyo> @Wuerfel_21 check
the config, see if you can raise the limit, or get gud
hardware.
L631[16:04:17] <Michiyo> :P
L632[16:04:39] ⇦
Quits: DaMachinator
(webchat@185-2-111-208-in-addr-arpa.omnispring.net) (Quit: Web
client closed)
L633[16:05:44]
<Wuerfel_21>
but i need to have it on the default values to avoid writing stuff
that doesn't work on my server.
L634[16:06:01] <Michiyo> >get gud
hardware
L635[16:07:28]
<Wuerfel_21>
Maybe the implementation should be changed, so that rather than
measuring "time since last yield", "ticks since last
yield" is considered...
L636[16:08:10]
<Wuerfel_21>
so that when a loag spike comes 'round, the computers won't
randomly bluescreen
L637[16:08:13]
<Wuerfel_21>
so that when a lag spike comes 'round, the computers won't randomly
bluescreen
L638[16:15:46] <Temia> The issue is that
the timeout is implemented partly to keep a Lua instance from
grinding the server to a halt.
L639[16:19:03] <Michiyo> %weather
72396
L640[16:19:04] <MichiBot> Current weather
for Wynne, AR Current Temp: 89.7°F/32.1°C Feels Like: 97°F/36°C
Current Humidity: 56% Wind: From the WNW 1.0 Mph/1.6 Km/h
Conditions: Partly Cloudy
L641[16:19:09] *
Michiyo dies
L642[16:25:26]
<Mettaton_Fab> say, do you live in
hell?
L643[16:25:55] ⇦
Quits: Backslash
(~Backslash@ip-176-199-150-218.hsi06.unitymediagroup.de) (Ping
timeout: 200 seconds)
L644[16:28:47] ⇦
Quits: Inari (~Pinkishu@p5DEC61A4.dip0.t-ipconnect.de) (Quit:
'Bakkin. Bakkin, Buckingham.)
L645[16:30:30] <Michiyo> might as
well
L646[16:33:27]
<Mettaton_Fab> say, is 36°C acceptable for
a school building?
L647[16:33:31]
<Mettaton_Fab> as in temperature inside in
summer
L648[16:34:47] <Forecaster> depends
L649[16:35:01] <Forecaster> if the
students mainly consist of ice cream I'd say no
L650[16:35:57]
<Mettaton_Fab> and if that said temperature
is rising surprisingly fast?
L651[16:36:00]
<Mettaton_Fab> to like 40°C?
L652[16:37:03]
<Mettaton_Fab> while the other side of that
part of school has cool af rooms which only heat up at like 16
o'clock=
L653[16:37:05]
<Mettaton_Fab> *?
L654[16:43:36] ⇦
Quits: BearishMushroom
(~BearishMu@90-231-174-194-no159.tbcn.telia.com) (Read error:
Connection reset by peer)
L655[16:43:56] ⇦
Quits: Vexatos (~Vexatos@p5B3C9D9D.dip0.t-ipconnect.de) (Quit: I
guess I have to go now. Bye ✔)
L656[17:05:10]
⇨ Joins: xarses_ (~xarses@67.218.117.197)
L657[17:07:26] ⇦
Quits: andreww (~xarses@67.218.117.197) (Ping timeout: 204
seconds)
L658[17:25:18] <Kodos> Welp my wife is
scarred for the day
L659[17:29:21]
⇨ Joins: brandon3055
(~Brandon@ppp121-44-126-217.bras1.syd7.internode.on.net)
L660[17:39:57] <Forecaster> did you manage
to convince her she's the only woman left?
L661[17:40:43]
⇨ Joins: andreww (~xarses@67.218.117.197)
L662[17:42:45] <payonel> wuerfel_21: the
default timeout is configurable as well
L663[17:42:54] ⇦
Quits: xarses_ (~xarses@67.218.117.197) (Ping timeout: 204
seconds)
L664[17:44:34] <Kodos> Forecaster, no, she
was trying to find more games like Ark, so she googled 'dinosaur
genre'
L665[17:44:34] <Kodos> (Do it at your own
risk, kids)
L666[17:44:48] ⇦
Quits: andreww (~xarses@67.218.117.197) (Ping timeout: 204
seconds)
L667[17:45:52] <Mimiru> >Dinosaur
erotica
L668[17:45:55] <AshIndigo> %choose search
it or you have better things to.do
L669[17:45:56] <MichiBot> AshIndigo: you
have better things to.do
L670[17:46:06] <AshIndigo> OK
michibot
L671[17:46:17] <Mimiru> I just gave you
the "answer" to it
L672[17:46:18] <Mimiru> lol
L673[17:46:57] <AshIndigo> My message came
up first for on my screen :/
L674[17:47:09] <AshIndigo> s/for/
L675[17:47:45] <Mimiru> mine was 3 seconds
before, for me :P
L676[17:47:59] <AshIndigo> %blame data
connection
L677[17:47:59] *
MichiBot blames data connection for adding a slightly-chewed u to
the inventory!
L678[17:50:53]
⇨ Joins: Freelancer95
(~freelance@cpc94664-burn8-2-0-cust199.10-1.cable.virginm.net)
L679[17:52:14] ⇦
Quits: Freelancer95
(~freelance@cpc94664-burn8-2-0-cust199.10-1.cable.virginm.net)
(Client Quit)
L680[18:04:55] <AmandaC> %give MichiBot a
persistent and uneasy feeling that she's being watched by a
duck
L681[18:04:56] *
MichiBot accepts the persistent and uneasy feeling that she's being
watched by a duck and adds it to her inventory
L682[18:05:03] *
Izaya yawns
L683[18:06:18] <vifino> Good morning(?),
Izaya.
L684[18:06:59] <Izaya> Questionable, but
morning.
L685[18:07:01] <Izaya> Hai vifino
L686[18:08:50] <vifino> sup?
L687[18:10:00] <ds84182> %give MichiBot an
oversized fly
L688[18:10:01] *
MichiBot accepts the oversized fly and adds it to her
inventory
L689[18:10:21] <Izaya> Everything is on
fire
L690[18:10:32] <Izaya> but \o/ that's
normal I guess
L691[18:10:33] <ds84182> %give MichiBot an
oversexualized dinosaur
L692[18:10:34] *
MichiBot accepts the oversexualized dinosaur and adds it to her
inventory
L693[18:13:56] <ds84182> %inv add an array
of denormalized numbers
L694[18:13:56] *
MichiBot summons 'an array of denormalized numbers' and adds to her
inventory. This seems rather fragile...
L695[18:58:31]
⇨ Joins: Cervator1
(~Thunderbi@c-98-192-133-39.hsd1.fl.comcast.net)
L696[19:00:20] ⇦
Quits: Cervator (~Thunderbi@2601:4c1:4000:1050:1c:766e:b019:3794)
(Ping timeout: 201 seconds)
L697[19:00:20] ***
Cervator1 is now known as Cervator
L698[19:05:47] ⇦
Quits: Nathan1852
(~Nathan185@HSI-KBW-37-209-117-136.hsi15.kabel-badenwuerttemberg.de)
(Read error: Connection reset by peer)
L699[19:08:50] ⇦
Quits: Sava (~Sava@cable-178-148-185-58.dynamic.sbb.rs) (Ping
timeout: 201 seconds)
L700[19:16:08]
⇨ Joins: Sava
(~Sava@cable-178-148-185-58.dynamic.sbb.rs)
L701[19:31:37]
<Dudblockman> I'm thinking of doing
something silly.
L702[19:32:12]
<Dudblockman> Between drones, transposers,
and adapters
L703[19:32:57]
<Dudblockman> I think it would be possible
to automate bee breeding
L704[19:37:23]
<Dudblockman> Drones would handle
logistics
L705[19:37:56]
<Dudblockman> Adapters would handle the
brains
L706[19:38:10]
<Dudblockman> Transposers would handle the
internal automation
L707[19:51:33] ⇦
Quits: Turtle (~SentientT@ip5657cbb2.direct-adsl.nl) (Read error:
Connection reset by peer)
L708[19:51:38] ⇦
Quits: Kodos (~Kodos@2602:306:ce20:6c30:192a:7585:b2d7:5da1) (Read
error: Connection reset by peer)
L709[19:51:38]
⇨ Joins: Kodos
(~Kodos@2602:306:ce20:6c30:192a:7585:b2d7:5da1)
L710[19:51:40]
zsh sets mode: +v on Kodos
L711[19:51:48]
⇨ Joins: xarses_ (~xarses@67.218.117.197)
L712[19:57:24] ⇦
Quits: DeeJayh_ (~DeeJayh@184.91.145.126) (Read error: Connection
reset by peer)
L713[20:05:57] ⇦
Quits: Dark (~MrDark@2607:fcc8:d48b:eb00:b1d7:b5fc:566e:dcc3) (Read
error: Connection reset by peer)
L714[20:10:02]
⇨ Joins: Dark
(~MrDark@2607:fcc8:d48b:eb00:15e:8b51:fff8:78d1)
L715[20:30:13] ⇦
Quits: AshIndigo (uid202308@id-202308.charlton.irccloud.com) (Quit:
Connection closed for inactivity)
L716[22:58:46]
⇨ Joins: brandon3055_
(~Brandon@pa49-184-154-237.pa.vic.optusnet.com.au)
L717[22:59:15] ⇦
Quits: brandon3055
(~Brandon@ppp121-44-126-217.bras1.syd7.internode.on.net) (Read
error: Connection reset by peer)
L718[23:32:37]
⇨ Joins: AshIndigo
(uid202308@id-202308.charlton.irccloud.com)
L719[23:57:14] ⇦
Quits: Crazylemon (~Crazylemo@207.62.170.210) (Read error:
Connection reset by peer)
L720[23:59:51] ⇦
Quits: MajGenRelativity
(~MajGenRel@c-73-123-203-209.hsd1.ma.comcast.net) (Read error:
Connection reset by peer)